Torsion Springs
Garage door torsion springs made in Vietnam.
VTS COMPANY LIMITED manufactures e-coated garage door torsion springs for North American distributors and service companies, in standard wire sizes and inside diameters or to your drawing.
Specifications
| Wire size | .192" to .421" (22 standard sizes) |
|---|---|
| Inside diameter | 1-3/4", 2", 2-5/8", 3-3/4", 5-1/4", 6" |
| Length | Made to your specification |
| Wind direction | Left wind and right wind |
| Cycle life | 40,000 to 80,000 cycles |
| Finish | E-coated black (in-house) or oil tempered |
| Cones | Standard winding and stationary cones |
| Material | High-carbon spring steel |
| Minimum order | 50 pairs (factory production) |
| Lead time | 20–30 days after order confirmation and specification approval |
Color codes
| Wire size | Color code |
|---|---|
| .192" | Orange |
| .207" | Yellow |
| .218" | White |
| .225" | Red |
| .234" | Purple |
| .243" | Green |
| .250" | Gold |
| .262" | Blue |
| .273" | Orange |
How do I measure a replacement spring?
- Measure the wire size across 10 or 20 coils and divide by the number of coils.
- Measure the inside diameter of the spring, usually 1-3/4" or 2" on residential doors.
- Measure the length of the coils only, not including the cones.
- Check the wind direction: looking at the end of the spring, a left wind spring is installed on the right side of the center bracket.
Can you make springs to our drawings?
Yes. Send your drawing or specifications, quantity, marking and packing requirements, and destination port. See custom and private label programs for marking and packing options.